Versions Available:
Model 5512-01: 8 line-level analog inputs and 8 line-level analog outputs
Model 5512-02: 16 line-level analog inputs and 16 line-level analog outputs
Network Audio Technology: compliant with SMPTE ST 2110-10:2017 and ST 2110-30:2017 (support for other related standards pending, including AMWA IS-04 and IS-05)
Redundant Streams: compliant with SMPTE ST 2022-7:2013 Seamless Protection Switching
Synchronization: per SMPTE ST 2110-10, Precision Time
Protocol (PTP) IEEE® 1588-2008 Version 2; supported profiles include SMPTE ST 2059-2, AES67, and IEEE 1588 Default
Remote Control of Network Connections: JSON API
Remote Control of Input and Output Parameters: web pages provided by internal web server
Audio Performance and Transport:
Sampling Rate: 48 kHz
Bit Depth: 24
Number of Sender (Output or transmitter) Channels: 8 (Model 5512-01) or 16 (Model 5512-02)
Number of Receiver (Input) Channels: 8 (Model 5512-01) or 16 (Model 5512-02)
Stream Characteristics: TBD
Network Interfaces:
Qty: 3; primary, secondary, and management
Type: 1000BASE-T (Gigabit Ethernet ("GigE")) per IEEE 802.3ab
NIC Status LEDs: one link and one activity for each Ethernet interface
Analog Inputs:
Type: electronically balanced, capacitor coupled, intended for connection to balanced (differential) or unbalanced signal sources
Impedance: 20 k ohms
Nominal Level: 4 dBu, reference –20 dBFS, adjustable ±20 dB in 1-dB steps
Maximum Level: 24 dBu, results in digital output level of 0 dBFS
Dynamic Range: 120 dB, A-weighted
Distortion (THD N): <0.0004% (–108 dB), ref 1 kHz, 23 dBu input/–1 dBFS output
Frequency Response: ±0.2 dB, 14 Hz to 20 kHz
Analog Outputs:
Type: electronically balanced, capacitor coupled, intended to drive balanced or unbalanced loads of 2 k ohms or greater
Source Impedance: 200 ohms
Nominal Level: 4 dBu, reference –20 dBFS, adjustable ±20 dB in 1-dB steps
Maximum Level: 24 dBu
Dynamic Range: >119 dB, A-weighted
Distortion (THD N): <0.001% (–101 dB), reference 1 kHz, –1 dBFS input/ 23 dBu output
Frequency Response: ±0.1 dB, 6 Hz to 20 kHz
Remote Configuration Capability: analog input and analog output nominal level adjustable ±20 dB (uses web pages accessible by way of management port)
Front-Panel Display: backlit LCD
Software Updating: USB flash drive supports updating of application and FPGA firmware (embedded software)
Power Sources:
AC Mains: 100 to 240 V, 50/60 Hz, 20 W maximum
DC: 10 to 18 V, 1.5 A maximum
Connectors:
Analog Inputs and Analog Outputs: 25-pin female D-subminiature (DB-25F), AES59-2012-compliant
Ethernet: RJ45
USB: type A receptacle (used only for firmware updates)
DC Input: 4-pin male XLR (pin 1 negative, pin 4 positive)
AC Mains Input: 3-blade, IEC 320 C14-compatible (mates with IEC 320 C13)
Environmental:
Operating Temperature: 0 to 50 degrees C (32 to 122 degrees F)
Storage Temperature: –40 to 70 degrees C (–40 to 158 degrees F)
Humidity: 5 to 95%, non-condensing
Altitude: not characterized
Dimensions – Overall:
19.0 inches wide (48.3 cm)
1.72 inches high (4.4 cm)
7.8 inches deep (19.8 cm); 8.3 inches (21.1 cm) overall
Mounting: one space (1U) in a standard 19-inch rack
Weight: 3.2 pounds (1.5 kg)
Specifications subject to change without notice.