Resources

AUDIOropa ProLoop DCC Plus Loop Amplifier

Product Code: HT A-4264-0

Key Features
PROLOOP DCCplus
$850.00 GST Exempt
(Each)
Increase value Decrease value
Qty Each (inc GST) Each
In Stock
  • Features
  • Overview
  • Technical Specs
  • Documents

AUDIOropa ProLoop DCC Plus Loop Amplifier

The PROLOOP DCCplus is designed for rooms of up to 1000 m² with loop signals and is the ideal solution for events and meeting venues. Each of the two XLR(F) inputs can be configured as LINE (symmetrical) or as microphone input (asymmetrical). The equipment provides an output of up to 12 A RMS and guarantees secure audio transmission. The Automatic Gain Control hereby ensures good sound reproduction at constant field strength and high stability. For standard and low overspill supply Beyond the standard application the PROLOOP DCCplus is also suitable for the realisation of low overspill loop systems. This requires two PROLOOP DCCplus devices. The devices are connected via the integrated jack sockets “Slave In” and “Slave Out”. Simple and safe handling High output current: 12 A RMS Main transfer switch 115 / 230 V AC Active protection against short circuits Two XLR(F)-sockets configurable as Microphone input (amplifier setting, phantom feed) or LINE-input (amplifier setting) 100-V-priority input for the connection of ELA systems Separate treble/base regulation Display of loop current 6.3-mm-headset socket to monitor audio signals Control to reduce metal losses Suitable for the set-up of low overspill systems 19” rack casing

Exempt from GST under exemption code R11

Warranty

We offer a 5 year warranty on this product from its date of purchase. For more information regarding our support, repair and warranty, please download our Warranty Guide here.

Main connection 230 V AC, 45-60 Hz, 150 Watt
Passive protection Fuse 1.5 A
Surface coverage 1000 sqm acc. to IEC 60118-4
Induction loop output
Max. current 12 A RMS, 25.4 A from peak to peak, 1-5 ms, 1 kHz
Max. voltage 44 V peak
Outputs-AGC Sets the voltage and current for continuous signals such as oscillation and sinus curves to -10 dB after 0.6-1 seconds. Short pulses and normal program signals are not limited.
Frequency range 100 – 5.000 Hz (±3 dB)
Distortion < 1 %
Cable connection 2 screw terminals on the reverse of the device
Outputs
Slave SLAVE OUT, 0° - 90° phase shift adjustable, 6.3 mm jack plug
Inputs
IN 1 XLR(F) socket, microphone input symmetric, sensitivity 1 mV
IN 2 XLR(F) socket, can be switched as a microphone or line input
Slave SLAVE IN, 6.3 mm jack plug
100-V priority input for connection to PA systems
AGC
Dynamics > 36 dB
Control and display
Induction loop setting Rotary knob
Input level IN 1 and IN 2 can be set separately
Display Main connection: 1 green LED
Input level 6 different coloured LEDs
Current: 6 different coloured LEDs
Induction loop monitoring
1 headphone output
Housing
Dimensions 90 x 430 x 270 mm (H x W x D), 19-inch rack (2 height units)
Attachment 4 attachment points on the front plate for installation in 19-inch rack
Colour black
Weight 7.8 kg

Accessories

Increase value Decrease value View Product
Increase value Decrease value View Product
AUDIOropa Copper Ribbon 5.4 mm2 Self Adhesive 50m HT A-4937-0
Estimated Lead time 2-4 weeks
$659.51 (Each)
Increase value Decrease value View Product
AUDIOropa Copper Ribbon 5.4 mm2 Self Adhesive 100m HT A-4948-0
Estimated Lead time 2-4 weeks
$1,319.03 (Each)
Increase value Decrease value View Product
$731.80 (Each)
Increase value Decrease value View Product
$61.36 (Roll)
Increase value Decrease value View Product
Products to compare:
Comparing Products
Your browser currently does not support some features required by this site. Please try another browser